A Cadillac Lyriq struck a garage at low speed, and a brake software glitch tied to 67,380 electric SUVs is the confirmed cause

Automotive
November 17, 2026 · 6:30 PM5 min read

A driver eases into a tight parking lot turn and taps the brake pedal while crossing the lip where a driveway meets the street.

For a fraction of a second, nothing happens.

No warning light, no grinding noise, just a pedal that briefly goes soft.

Federal regulators have now logged a fix for that exact moment as a formal recall covering tens of thousands of electric SUVs.

So what is actually happening inside the brake computer when that split second hits?

How a brake computer can talk itself out of stopping the car

Every modern vehicle with anti-lock brakes relies on a small computer that constantly compares the rotational speed of all four wheels. If one wheel suddenly spins slower than the others, the software assumes it is locking up and briefly releases brake pressure to that corner so the tire keeps rolling instead of skidding.

That logic works fine on a straight road. But the problem occurs during light braking at low speeds, particularly when the vehicle encounters a bump or dip mid-turn, and a momentary release and reapplication of the brakes can mislead the software’s slip calculation .

In a turn, the inside and outside wheels are already spinning at naturally different speeds, and the bump adds a brief jolt the software cannot tell apart from real wheel slip. So the brake system control module does exactly what it was designed to do. It reads the mismatched wheel speeds as a skid and pulls brake pressure away from the car for a moment, even though no wheel was ever actually locking up.

The car is not broken in any permanent sense. “Normal brake function returns on the next brake press,” GM wrote in its safety recall report to the National Highway Traffic Safety Administration. But that one missing beat is enough to turn a routine parking maneuver into a crash risk.

Which cars are affected and how big this recall really is

General Motors is recalling 67,380 Cadillac LYRIQ, Chevrolet Blazer EV, Cadillac CELESTIQ and Cadillac VISTIQ electric vehicles because software in the brake system control module (BSCM) may cause a temporary loss of braking at low speeds . Not every version is included, only performance all wheel drive configurations, since this recall only involves vehicles with Performance All-Wheel Drive, and vehicles with different drive configurations are not involved .

On the Blazer EV specifically, that narrows things further. The pAWD setup is only offered on the SS and PPV trims , the manufacturer’s police pursuit variant, meaning some police fleets now have their own recall paperwork to process.

Numerically, the Lyriq carries most of the weight here, accounting for roughly two thirds of the total vehicles involved, stretching across model years 2023 through 2027. None of this touches the base rear drive versions of any of these SUVs, because two-wheel-drive Cadillac Lyriqs are not included in the recall .

How investigators traced a bump back to the software

The paper trail starts with an internal safety tip rather than a customer complaint. The issue surfaced on April 10, 2026, when a GM technical expert filed a report through GM’s Speak Up for Safety program after reviewing an incident in which a 2024 Cadillac LYRIQ struck a garage at low speed. The circumstances were similar to those in NHTSA recall 24V589, but the vehicle had been built with the software improvements GM used as the remedy for that recall.

That detail mattered. So the safety engineers reopened the question rather than assuming the earlier fix had closed the book.

Engineers then worked to reproduce the fault in testing, eventually isolating it to the module’s slip calculation, the piece of code that decides whether a wheel is actually losing grip. The automaker confirmed to regulators that a light brake application during a sharp, low speed turn across a bump can trigger the temporary pressure release. GM opened a product investigation on Aug. 18, 2026, and its Safety Field Action Decision Authority decided on Oct. 22 to conduct the recall. Dealers were notified and the filing reached the federal safety regulator on October 29, which logged it under campaign number 26V717.

Where the fix lands and where the limits of this recall sit

The remedy itself is straightforward by current standards. The fix is a free software update to the brake system control module. Owners who have opted in to over the air updates can get it remotely. Everyone else can have a dealer install it.

That update folds in more than just this one glitch. Vehicles covered by the earlier recall 24V589 that have performance all-wheel drive are also included in this action, with the new brake system control module software update addressing both issues.

Even so, the fix has real boundaries. The filing notes the defect requires a specific, narrow sequence, light pedal pressure, a sharp low speed turn, and a bump arriving together. That narrowness is also why this episode sits closer to the dashboard chip failures this desk has tracked in other recent recalls, where a software fix, not a wrench, solves the problem.

What this recall means for EV owners going forward

For the owners involved, the practical ask is small. Check a VIN against the federal recall database, accept the over the air push if the vehicle supports it, or book a short dealer appointment if it does not.

The garage strike was only the incident that opened the file. GM received 24 related field complaints from February 24, 2024, through June 11, 2026, and of those reports, 20 concerned minor accidents, while two alleged minor injuries , so this is not a case with zero real world consequences, just one where the consequences have so far stayed small.

This one is a reminder that as braking increasingly runs through lines of code rather than purely mechanical linkages, the defects worth tracking are often a few flawed lines rather than a worn part. Catching that fault through an internal tip, not a lawsuit, is itself a small sign the system built to catch these problems is doing its job.

Hugo Rojas
Editor
Hugo Rojas is the editor of GCN. With a Master of Science in Engineering, he specializes in technology, data, and science, and brings a human-centered perspective informed by psychology.