A pickup’s front trunk is sold as a drainable 14 cubic foot cooler for ice and drinks, but owners say water pooling there is corroding the lights and release switch

Automotive
November 19, 2026 · 6:30 PM5 min read

Ice packed on top of sodas, a cooler bag wedged next to a phone charger, the lid clicking shut on a compartment where an engine used to sit.

That is the pitch for the front trunk on today’s electric pickups.

It is marketed as bonus everyday storage, built to be hosed out and drained like a tailgate cooler.

Some owners say that same drain is now where their trouble starts.

Water is finding its way past the lid seals and settling near wiring it was never supposed to touch.

So what is actually happening inside that space when the rain starts falling?

How the frunk’s own design invites water where the wiring sits

The front trunk on an electric pickup exists because there is no engine up front anymore, just a sealed battery pack lower down and an open shell above it. Automakers turned that empty space into cargo room, and some added a drain plug specifically so the compartment could double as a cooler.

That drain is the whole point of the design. Ford has advertised someone throwing bags of concrete in the frunk, or having a saw up there, alongside demonstrations that treated it like an ice chest, as owners on Ford’s own F-150 Lightning forum have described.

But a compartment built to hold standing water sits inches from LED light fixtures, a release button and its wiring. One repair guide walking through the failure wrote plainly that “failure of the frunk LED lamps on the F-150 Lightning is almost always related to a single root cause: moisture getting inside the housing.” The drain solves one problem and appears to create a second one nearby.

What owners are actually finding when they lift the lid

Forum threads describe a familiar pattern. A driver opens the frunk after a wash or a storm and notices condensation beading inside the clear light lens, sometimes just a few drops, sometimes enough to pool and linger for days before anyone notices.

One owner wrote about checking his own truck and finding “a few drops of water inside the passenger side light,” adding that as far as he could tell, the only way water could get in there was condensation. The lights still worked, but the moisture did not go away on its own.

Because that water has somewhere to travel, several owners report a second failure close behind. A repair guide notes that “the water that leaks past the frunk light’s bad seal often drips directly onto the wiring and connector for the frunk release button, causing it to corrode and fail.” Lose that switch and the only backup is a manual cable hidden behind the front bumper, far less convenient than the one touch button buyers were sold on.

Drivers have also reported water finding its way toward the windshield drainage path running close to the frunk’s open cavity.

Where this shows up in service records and warranty claims

This is not a single unlucky truck. Multiple owners across the same ownership forum have opened service tickets for the identical symptom, and dealerships have had to escalate some of those cases directly to the manufacturer before approving a fix.

One owner recounted that process in a forum thread on the issue after reporting water inside his frunk lights, writing that the dealer said they had never seen water in these frunk lights and since this was a warranty issue they had to submit pictures to Ford, which added days to the repair.

Elsewhere, a similar failure had already been logged. Ford’s broader recall history for the same truck includes a separate campaign, a recall for moisture in the rear lightbar (Recall 23S30), a sign that water intrusion around exterior lighting is not confined to one component.

None of this has risen to a dedicated safety recall for the frunk lights themselves, as the frunk lights are not covered by a specific safety campaign, so buyers who find the symptom today are working through standard warranty claims rather than a scheduled campaign.

Where the marketing and the hardware start to pull apart

None of this means the frunk concept has failed outright. Most owners who load the compartment with dry cargo, a cooler bag or a toolbox never see a drop of water near the electronics, and the space remains one of the most praised features on the truck.

Even so, the specific use case the trucks were marketed around, loose ice and drinks sitting directly against the plastic liner, is the exact scenario most likely to expose the gap between the drain hole and the seals around nearby components. The feature works as cargo space; it strains as a literal cooler.

That contrast matters because electric pickups keep adding more bonus functionality to justify their price, the same way a Detroit automaker has leaned on a single liquid cooled chip to simplify wiring elsewhere in a future SUV. It also lands as federal regulators scrutinize moisture related failures across new vehicle technology, the same scrutiny that followed a braking software glitch tied to tens of thousands of electric SUVs in a separate Cadillac investigation earlier this year.

What buyers can reasonably expect going forward

For now, the fix available to most owners is simple and unglamorous: keep the frunk’s drain channel clear of debris, avoid loose ice directly against the plastic without a sealed container, and inspect the light housings periodically rather than waiting for a bulb to fail.

That is a modest ask compared with the bigger promise printed in the brochure, and it does not erase the convenience the compartment genuinely offers for everyday errands or tailgate setups.

Still, the gap between the marketing image and the smaller print about keeping drains clear is exactly the kind of detail that only shows up after a truck has spent a season in real weather. Owners who want the full utility of the frunk without the recurring light repair seem to be landing on a simple compromise: treat it as dry cargo storage first and an occasional cooler second, a small adjustment that keeps the feature useful without testing seals under strain.

Hugo Rojas
Editor
Hugo Rojas is the editor of GCN. With a Master of Science in Engineering, he specializes in technology, data, and science, and brings a human-centered perspective informed by psychology.